主营产品

product

三通
德甲(上海)新材料科技有限公司
电话:86-021-61277588
手机:13738299344



上一条:弯头
下一条:异径直接
 返回列表
详细信息

Product details:
The high-end equipment, raw materials of ADL patent PP-R, a superior quality: the cross section is smooth, uniform plasticizing performance and good quality products, uniform wall thickness, diameter.
The material is enough, the outside diameter wall thickness is uniform: the 25*4.2 specification hot water pipe thermal insulation compression performance is better;
The products are glued on the surface of two-dimensional code anti-counterfeit labels, including brand label, the company web site, telephone, security code and other information, a sign, enhanced product verification;
Laying mode
The German andron can according to customer demand, to provide a variety of pipeline products and solutions for domestic water supply system, no matter what kind of pipeline, both to ensure the safety of every link, firm, reliable, effective Water Leakage avoid risks.
A: buried: the laying way of connecting surface completely into one, no interface, and can increase the connection strength, reliable sealing, long service life, the way of laying technology is becoming increasingly mature.
Two: laying in the ceiling: no need to be slotted when installing, easy to walk, easy to repair. At present, it has become a mainstream way of laying.
Three: embedded in the wall: it is embedded into the wall, floor, model, etc., the dark pipe due to the restrictions of the walls, so no need to consider the thermal expansion of the pipeline, but also more common way of laying.
Welding procedure:
A: the surface of the pipe and joints to ensure smooth, clean, no oil.

Two: in the pipe into the depth of the insertion mark (equal to the depth of the junction of the joint).
Three: the entire embedded depth of heating, including pipes and joints, according to the welding tool book.
Four: when the heating time is completed, the pipe is balanced and uniform into the joint, the formation of a solid and perfect combination.
Five: in a few seconds after the pipe and joint welding, you can adjust the position of the joint.
Six: after a short time, the joint can bear the load.
产品细节:
①:高端设备、专利原料ADL® PP-R、创卓越品质:横截面光滑平整、产品塑化均匀、表现质量好,外径壁厚均匀。
②:用料充足,外径壁厚均匀:25*4.2规格热水 管保温抗压性能更佳;
③:产品表面黏贴 二维码防伪标签,标签包含品牌、公司网址、查询电话、防伪码等信息,一一签,增强产品的验证性;
敷设方式
德国安德龙可以根据客户需求,为家用供 水系统提供多种管道产品和解决方案,无论哪种管道,都确保每一环节安全、牢固、可靠,有效避免漏水隐患。
一:埋地敷设:该敷设方 式连接面完全融于一体,绝无界面,且可增加连接面强度,密封性可靠,使用寿命长,该敷设方 式技术日益成熟。
二:吊顶内敷设:安装时无需开槽,走线方便,容易检修。目前,已成为一 种主流的敷设方式。
三:嵌墙敷设:主要是埋嵌到墙壁、楼板、样板等处;暗装管道 由于有墙壁的限制,因此无需 考虑管道的热膨胀,也是比较 常见的敷设方式。
焊接步骤:
一:管道和接 头的表面要保证平稳、清洁、无油。
二:在管道插 入深度处做记号(等于接头的套入深度)。
三:把整个嵌入深度加热,包括管道和接头,按焊接工具书进行。
四:当加热时间完成后,把管道平 衡而均匀的推入接头中,形成牢固 而完美的结合。
五:在管道和 接头焊接之后的几秒钟之内,可以调节接头位置。
六:在短时间之后,接头就完 全可以承受负荷。

返回顶部

德甲(国际贸易) 电话:13738299344 邮编:200000 地址:上海市嘉定区
技术支持:云网科技

友情链接:    福彩3d软件   爱彩票   k8彩票注册窗口   西游彩票   搜狐足彩